格式:pdf
大小:325KB
頁數: 4頁
本文介紹了陶瓷填料特性,具有使用壽命長、耐高溫、耐腐蝕、不易堵塞、抗凍性能好、性能穩定和維護費用低等優點,并用分析陶瓷淋水填料在5 500、6 000 m2 冷卻塔上的應用。
格式:pdf
大小:773KB
頁數: 5頁
Traditional ceramics packing has the shortcomings such as low porosity, small specific surface area and high bulk density. The foam ceramics ring packing (DX-1) with 0.4 height to diameter ratio was designed according to the characteristics of foam ceramics and stainless steel packing.(DX-1) has a porosity of 92%,specific surface area of 1825 m~2·m~(-3) and bulk density of 208 kg·m~(-3).In the desorption column with diameter 200 mm, air was used to desorb oxygen-enriched water.The hydrodynamic and mass transfer performance of DX-1 was investigated.When liquid spray density(L) was more than 50 m~3·m~(-2)·h~(-1), the pressure drop of DX-1 decreased by 55%—62% and(H_(OL))_(25℃) of DX-1 decreased by 12.7%—15.5% comparing to the stainless steel Pall ring packing.The hydrodynamic and mass transfer performance of DX-1 were equal to the stainless steel Intalox saddle packing.DX-1 was superior stainless steel packing in the cost and corrosion resistance.